System Configuration; Analog Hybrid Editing System - Sony EditStation ES-7 Operating Instructions Manual

Table of Contents

Advertisement

System Configuration

You can configure a variety of editing systems around
the ES-7 EditStation. The main types are as follows.

• Analog hybrid editing system

• Digital hybrid editing system
• Digital non-linear editing system
Analog Hybrid Editing System
As the video switcher, this system employs the
optional ESBK-7021 Basic DME Switcher Board or
ESBK-7023 Advanced DME Switcher Board. As the
three-dimensional effects processor, it employs the
optional ESBK-7022 3D Effect Board for Basic DME
Switcher or ESBK-7024 3D Effect Board for
Advanced DME Switcher.
The configuration includes two analog player VCRs
and one analog recorder VCR. This enables hybrid
editing, which is the application of special effects
while switching between video stored on the disk
recorder and video stored on tape.
ESBK-7011 Control Panel
• ESBK-7021 Basic DME Switcher
Board (or ESBK-7023 Advanced DME
Switcher Board)
• ESBK-7022 3D Effect Board for Basic
DME Switcher (or ESBK-7024 3D
Effect Board for Advanced DME
Switcher)
• ESBK-7041 Disk Recorder Board
• ESBK-7051 SCSI Option
Player VCR 1
Preview monitor
ES-7 EditStation
Keyboard
All components not enclosed by
the broken lines are optional.
Player VCR 2
Recorder VCR
Analog hybrid editing system
• Analog linear editing system
The following sections show how each type of editing
system is configured.
For editing with a large number of short cuts, video
clips can be copied from tape to the disk redorder. This
improves editing efficiency by taking advantage of the
rapid cue-up times for clips stored on disk. Longer cuts
can be recorded directly from tape, saving the time
required to copy clips to the disk recorder. Depending
on the materials and contents of the edit, you can
choose whichever method is most efficient.
The results of the edit are recorded on tape by the
recorder VCR. The MO drive is used to store and
access edit data.
Computer monitor
Mouse
Program monitor
(connect as required)
Audio amplifier and speakers
MO drive
ESBK-7045 Disk Unit
ESBK-7045 Disk Unit
(connect as required)
ESBK-7045 Disk Unit
(connect as required)
ESBK-7045 Disk Unit
(connect as required)
Chapter 1 Overview
9

Advertisement

Table of Contents
loading

Table of Contents