Advertisement
Figure 4
Threading one jack screw completely before threading the other jack screw might result in connector
Caution
misalignment and damage to the EIA. Do not overtighten the jack screws.
Install the remaining three 6-32 x 5/16-inch pan head screws onto the EIA and torque to 8 to 10 in-lbs.
Step 7
Repeat Steps
Step 8
Related Documentation
•
•
•
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional
information, see the monthly What's New in Cisco Product Documentation, which also lists all new and
revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as an RSS feed and set content to be
delivered directly to your desktop using a reader application. The RSS feeds are a free service. Cisco currently
supports RSS Version 2.0.
This document is to be used in conjunction with the documents listed in the
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks
can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word
partner does not imply a partnership relationship between Cisco and any other company. (1005R)
78-17418-01
EIA Jack Screw
Inner screw
Rotation indicator
Thumbscrew
3
through
7
to install the other EIA, as necessary.
Cisco ONS 15310-CL and Cisco ONS 15310-MA Procedure Guide
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide
Installing the High-Density Electrical Interface Assemblies on the Cisco ONS 15310-MA
"Related Documentation"
section.
Related Documentation
5
Advertisement
