Honeywell HFD360 Series Owner's Manual page 3

CONTROLS THAT DO THE THINKING FOR YOU
General Cleaning Setting
Auto Timer Display
Germ Reduction Setting
Sleep/Quiet Setting
Auto-off Timer
VOC sensor Auto mode
Power
Selecting Settings – Once you have tapped the POWER icon ( ), tap the Cleaning Level icon (
the desired cleaning level. Your air cleaner will start on the General Cleaning setting each time you turn
the air cleaner on. Continue to tap the ( ) icon to cycle through the cleaning levels to reach the desired
setting. Here is a handy reference to help get the most out of your air cleaner's performance:
LEVEL 6 - MAX
Best for power cleaning when unpleasant odors are noticeable or you can sense that airborne particles are
present. This setting cleans the air the fastest of all the settings and circulates the air more frequently in
the room.
LEVEL 5 - ALLERGEN
This setting makes the air cleaner perform at the proper level for reducing many types of airborne
allergens. It optimizes its performance for reducing allergens based on the particle size range of typical
pollens. Best for fighting airborne allergens during high allergen season, particularly in the spring and fall to
help reduce airborne pollen.
LEVEL 4 - PET
This setting optimizes performance to best capture pet hair and dander as well as reduce pet odors.
LEVEL 3 - GENERAL
Best for General Cleaning. Use this setting to help reduce airborne dust and smoke particles, like those
from cooking or tobacco smoke.
LEVEL 2 - GERM
This setting slows down air movement so airborne microscopic germs are most effectively captured in
the filter. Germs, like certain bacteria and viruses, can be much smaller than other airborne particles or
organisms. Giving the germs more time to dwell in the filter increases the filtration efficiency. This setting can
be used during cold and flu season to help reduce certain germs from the air that passes through the filter.
LEVEL 1 - SLEEP
Best for ultra quiet operation, perfect for nighttime use when sleeping.
4
CONTROLS (CONTINUED)
Oscillate – To turn Oscillation on, simply tap (
Filter Check Reminder
Auto-off Timer – The Timer Option (
automatically shuts off. The timer can be set in one hour intervals from one to eighteen hours. Do not use
Pet Setting this option if you want the unit to run continuously.
• To set the unit for Automatic Shut Off, TAP (
Bluetooth Indicator
®
• TAP the up or down arrows (
setting 1-18 hours.
Allergen Reduction Setting
• The digital timer will indicate the selected run time (Fig. 3).
Max Cleaning Setting
• The LED Display will automatically count down and display the number of
hours left on the timer.
Dimmer
• The unit will automatically shut off after the indicated run time.
Oscillation Dimmer – The Dimmer Option (
panel. You may wish to adjust the brightness depending on the room where the unit is placed. The unit
always turns on with the brightness on HIGH.
Cleaning Level
To adjust brightness:
• TAP the (
) to select
• TAP the (
• TAPPING the (
NOTE: The Power (
Using the VOC Function –The AirGenius 6 has a built-in sensor that detects when Volatile Organic
Compounds (VOCs) are present in the room air. VOCs are gases that are emitted from certain household
cleaning, home improvement, and even common household décor products. These gases can be
harmful or irritating if inhaled. When the VOC auto sensing mode (
automatically operate at the appropriate cleaning level to reduce these gases.
TAP the VOC Auto Sensing mode icon (
air. When the VOC Auto Sensing mode is selected, the circular LED readout in the center of the control
panel will illuminate in green, amber or red to indicate the unit is running in
automatic VOC sensing mode. (Fig 4)
Green = Low level of VOCs detected, air cleaner will operate on lowest setting, Sleep.
Amber = Moderate level of VOCs detected, air cleaner will operate in the medium
level setting, General.
Red = High level of VOCs detected, air cleaner will operate in the Max setting.
The AirGenius 6 will continue to monitor the VOC levels in the room and adjust the
cleaning levels as necessary.
Electronic Filter Check Reminder –The AirGenius 6 has an electronic CHECK FILTERS
light to remind you when it is time to wash the ifD
Pre-filter. The CHECK FILTERS light will illuminate after 2160 hours (3 months) of operation. It is recommended
that you clean/replace the filters every 3 months. The 3 month cleaning interval is intended as a guideline only.
Performance of any filter media is dependent upon the concentration of contaminants going through the system.
High concentrations of contaminants such as dust, pet dander, and smoke will reduce the useful performance life
of the filters.
) once. To turn Oscillation off, tap (
) allows you to select how long the air cleaner will run before it
)
) to toggle through to the desired time
) allows you to adjust the brightness of the LED lights on the control
) once to dim the lights to LOW.
) twice and it will shut the lights OFF (the air purifier will not shut off).
) a third time will return the brightness to HIGH.
) and the Bluetooth ( ) icon will always remain illuminated.
) for automatic operation based on VOCs sensed in the room
® Particle Filter and replace the ODOR & VOC Reducing
) again.
Fig. 3
) is selected, the AirGenius 6 will
Fig. 4
K
5