With Accessory Backup Sensors - Honda 08L92-TLA-100 Installation Instructions Manual

www.collegehillshonda.com
78. Plug the trailer hitch harness 6-pin connector into the
vehicle 6-pin connector.
TRAILER HITCH
VEHICLE 6-PIN
HARNESS 6-PIN
CONNECTOR
CONNECTOR
TRAILER
HITCH
HARNESS
79. Secure the trailer hitch harness to the vehicle
harness with one wire tie.
30 of 40
VEHICLE
HARNESS
WIRE TIE
LEFT QUARTER
PILLAR TRIM
OPENING
AII07457-09 (1710)
If the vehicle is equipped with the accessory backup
sensors, continue with step 80; otherwise, go 
to step 82.

With accessory backup sensors

80. Using diagonal cutters, cut off the clip portion from
one wire tie with clip A.
CLIP ON THE 
ACCESSORY 
WIRE TIE
BACKUP SENSOR
WITH CLIP A
HARNESS
Cut off.
TRAILER HITCH
HARNESS
81. Line up the white tape on the trailer hitch harness to
the clip on the accessory backup sensor harness,
and secure the trailer hitch harness to the accessory
backup sensor harness with one wire tie with clip A.
Go to step 83.
© 2017 American Honda Motor Co., Inc. – All Rights Reserved.
ACCESSORY
BACKUP SENSOR
HARNESS
TRAILER
HITCH
HARNESS
WIRE TIE
WITH CLIP A
WHITE
LEFT REAR SIDE
TRIM PANEL
OPENING