www.collegehillshonda.com
If the vehicle is equipped with the standard hands free
access, continue with step 30; otherwise, go
to step 31.
With standard hands free access
30. Remove the standard hands free access unit from
the rear bumper.
NOTE: Follow the same procedure for the accessory
rear aero bumper.
STANDARD HANDS
FREE ACCESS UNIT
(Do not reuse.)
2 SELF-TAPPING
SCREWS
© 2017 American Honda Motor Co., Inc. – All Rights Reserved.
REAR BUMPER
(inside)
4 CLIPS
AII07457-09 (1710)
If the vehicle is equipped with the standard rear
bumper, continue with step 31; if the vehicle is
equipped with the accessory rear aero bumper, go to
step 43.
With standard rear bumper
31. Line up the template with the scribe marks on the
rear bumper, then tape it in place with masking tape.
REAR BUMPER
(inside)
REAR
BUMPER
Line up with the
scribe marks.
MASKING
TAPE
TEMPLATE
TOP VIEW
SCRIBE
MARKS
13 of 40