Electrical Power Cord - Maytag RS511 Service Manual

General Information

Electrical Power Cord

Receptacle
230 V / 13 AMP
Equipment requires a
230 VAC, 50 Hz, 13 amp power supply
Do not use a extension cord. If the product power cord is too short, have a qualified electrician install a
three-prong receptacle. This unit should be plug into a separate 230 VAC / 50 Hz power supply. If other equipment is
on the same circuit, an increase in cooking times may be required and fuse can be blown.
Model Identification
When contacting provide product information located on
rating plate. Record the following:
Model Number:
Manufacturing Number:
Serial or S/N Number:
Date of purchase:
Dealer's name and address:
10
Plug
_____________________
_____________________
_____________________
_____________________
_____________________
16021518 Rev. 0
Receptacle
Equipment requires a
230 VAC, 50 Hz, 16 amp power supply
Service
Keep a copy of sales receipt for future reference or in
case warranty service is required. To locate an authorized
servicer contact your local product distributor or vist the
Web site at www.amanacommercial.com.
Warranty service must be performed by an authorized
servicer. We also recommend contacting an authorized
servicer, if service is required after warranty expires.
Parts and Accessories
Purchase replacement parts and accessories over the
phone. To order accessories for your product contact
your local product distributor or vist the Web site at
www.amanacommercial.com.
Plug
©2002 Maytag Appliances Company