Related Manuals for HIKVISION DS-2TS03-35UM/W
Summary of Contents for HIKVISION DS-2TS03-35UM/W
- Page 1 Thermal Handheld Monocular User Manual COPYRIGHT © 2018 Hikvision. ALL RIGHTS RESERVED...
-
Page 2: Legal Disclaimer
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. - Page 3 guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna.
- Page 4 isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à...
-
Page 5: Box Content
1 Introduction Box Content Non-dust USB Cable Manual (×1) Cloth (×1) (×1) Protective Handheld Thermal Neck Bag (×1) Monocular (×1) Belt(×1) Overview The handheld thermal monocular is a handheld thermal camera with functions of observation, hot spot mark, distance measurement, Wi-Fi hot spot, and so on. The high-sensitivity built-in IR detector provides you with clear view even in total darkness. - Page 6 The device detects and marks the hot spot of highest temperature. Wi-Fi & Hot Spot: Device can capture snapshots, record videos, and set parameters via APP after being connected to your phone. GPS Function: The device can be located with GPS system.
-
Page 7: Buttons And Interfaces
Note: the dimension varies according to different camera modes. Buttons and Interfaces Take the figure below for the buttons and interfaces description of handheld thermal monocular. Press: LED Light Supplement Power On/Off. The function may not be supported by some camera models Hold: Power On/Off MODE... -
Page 8: Basic Operations
Lens Cover Cover the lens when you are not using the monocular. LED Indicator When the LED indicator is on: the device is activating. Slide the sight adjust knob to Sight Adjust Knob adjust the view according to your degree of myopia. USB Interface Charge the battery and export videos/snapshots with the USB... -
Page 9: Power On And Off
Plug in the USB cable and connect the other terminal into the power adapter. Plug the power adapter to the power source. When the monocular is turned on, the OSD (on-screen display) shows the battery status. When you see the Low Battery status, charge the monocular and ensure it’s working properly. -
Page 10: Basic Operation
Thermal View Observation Steps: Power on the monocular. Hold the monocular and make sure the eyepiece covers your eye. Slide the sight adjust knob to adjust the diopter until the OSD text or image is clear. Note: You must perform the sight adjustment before any further use of the monocular. -
Page 11: Main Function
Connect the thermal monocular to your PC with USB cable and open the detected disk. Enter DCIM>100EZVIZ to view the videos and snapshots. Select and copy the videos to PC and play the file with the player. Select and copy the snapshots to PC and view the files. - Page 12 or hot spot and record/capture with App. Press to enter distance measu rement mode. For details, refer to Section 4.2 Distance Measurement. Press to enable or disable the GPS function. Press to adjust the brightness. The icons on the left indicate: high Brightness, medium Brightness, and low Brightness.
-
Page 13: Distance Measurement
Distance Measurement Before you start: In the view mode, you can hold the button to enter the distance measurement mode. Or, you can hold the button to enter the menu and select to enter the distance measurement mode. Purpose: You can mark the top and bottom of the target in the distance to calculate the distance in between. -
Page 14: Digital Zoom
corner of the live view interface. Note: Enter the distance measurement interface, press view the measured distance. Hot Spot Mark In the menu, select and press to enable/disable hot spot mark (marking the spot of highest temperature). When the hot spot mark is enabled, the mark displays in the spot of the highest temperature. -
Page 15: Network Configuration
once to release the shutter once. Network Configuration Connect your phone to the Wi-Fi or hot spot of the monocular, you can configure the parameters and realize functions of the device. Wi-Fi Steps: Hold the button to show the menu of monocular. Press the key to enable Wi-Fi function. - Page 16 5 FAQ The charge indicator flashes improperly. Examine whether the device is charged with standard power adapter and the charging temperature is 0 °C to 45 °C (32 °F to 113 °F). Device power indicator is off. Examine whether the device is off-battery.