Part Names Of The Remote Control - Sanyo DSR-2004 Instruction Manual

Part names of the remote control

Batteries for the remote control are not supplied. Use two AAA batteries.
REC/STOP
1
1
2
4
7
3
ID
4
5
8
MENU
9
G
H
PTZ
J
SEQ
1 REC/STOP button
Stops and starts recording of live videos displayed on the
monitor.
2 Numeric buttons
Used to input passwords, camera number and ID number.
3 ID button
If a remote control ID number was set, press before
inputting it. (P32)
4
• SKIP button
During settings: Moves the cursor upward.
During playback: Skips the video 1 minute forward.
5 • f button
During settings: Moves the cursor to the left.
During playback: Fast rewinds.
6 • e button
During settings: Moves the cursor to the right.
During playback: Fast forwards.
7 REPLAY •
button
During settings: Moves the cursor downward.
During playback: Skips the video 1 minute backward.
2 3
5 6
8 9
0
SKIP
6
ENTER
7
REPLAY
EXIT
F
SEARCH
MARK
I
COPY
K
QUAD
b Inserting batteries in the remote control.
1 Take the battery cover off.
2 Place the batteries and fit the cover.
Note: Make sure the batteries are correctly oriented.
b Operation range
Max. 5 m
30°
8 ENTER • c/h button
During settings: Confirms the selected item.
During search: Plays back the selected video.
During playback: Displays a still video.
9 MENU button
Displays the setting menu screen.
F EXIT button (b)
To exit the settings mode and the menu screen.
G SEARCH button
Activates the recorded videos search mode.
H PTZ button
Activates the operation mode that operates the Pan/Tilt/
Zoom/Focus of the dome camera connected to the RS422/
485 terminal.
I MARK • COPY button
Activates the video saving mode.
J SEQ button
Sequences the videos of the connected cameras.
K QUAD button
Displays the quad-screen.
30°
54