Advertisement
Functions
OPERATION INSTRUCTIONS
1. Plug unit into power socket, unit will
beep once and power LED will illuminate
(currently in stand-by mode) and show the
current room humidity on the display.
2. Press Power button
3. Press Fan Speed button
desired speed High or Low.
4. Press
to set the desired humidity level
in the room, which can be set from 40% to
80% at 5% intervals.
NOTE
When the ambient relative humidity is
2% lower than the selected humidity, the
compressor will switch off and the fan will stop
3 minutes later. When the ambient relative
humidity is equal to or higher than the selected
humidity by 2%, the compressor will restart
once the compressor protection time of
3 minutes has lapsed.
PRODUCT SPECIFICATIONS
DEHUMIDIFICATION
POWER CONSUMPTION
CAPACITY OF WATER TANK
NOISE LEVEL
PRODUCT DIMENSIONS
NET WEIGHT
GROSS WEIGHT
8
5. Press the timer button
to turn unit on.
to set the
The timer circulates from 00-01-02-03...23-24.
CLI-DH10C AIR DEHUMIDIFICATION SYSTEM
10 LITRES/DAY (at 30°C/80% relative humidity)
245 Watts
1.9 Litres
<43dB (low fan speed) - <46dB (high fan speed)
H 470 x W 185 x L 276 mm
9.9 kgs
11 kgs
timer.
To set automatic ON timer, press timer
button when unit is in standby mode. Select
the desired time for unit to start operating
(from 1 hour to 24 hours at 1 hour intervals).
To set automatic OFF timer, press timer
button when unit is ON. Select the desired
time for unit to start operating (from 1 hour
to 24 hours at 1 hour intervals) Unit will
automatically switch off once selected off
time duration has lapsed.
To cancel the timer program press the timer
button so that it is set to 00.
NOTE
to select On/Off
Advertisement
