NETGEAR ReadyDATA 5200 Hardware Manual page 6

Each drive bay features a latch that releases the pop-out tray handle, as shown in the
following figure.
1
Figure 3. Disk tray handle and release latch
1. Disk tray handle
2. Disk tray release latch
WARNING:
No matter how many hard drives are installed in your system,
ensure that all drive trays remain in the drive bays to maintain
proper airflow.
For more information about adding and replacing disk drives, see
Replace a Disk on page 27.
The ReadyDATA 5200 comes with an front bezel that protects the drive bays with a lockable
cover. You can operate the ReadyDATA 5200 with or without the front bezel.
The following image shows a ReadyDATA 5200 with the front bezel installed.
Figure 4. ReadyDATA 5200 with front bezel installed
For more information about installing and removing the front bezel, see
page 20.
NETGEAR ReadyDATA 5200
Getting Started
6
2
Add a Disk on page 23 and
Front Bezel on