Advertisement
2 ZONE T6R SMART THERMOSTAT
Zone 1 thermostat setup and
Touch
to select heat
Touch
to finalise setup.
binding is complete.
only application
Thermostat is switched OFF
(
to setup using the
Honeywell App is currently
unsupported)
Zone 2 Thermostat powering up, setup and binding
Now place the second zone thermostat near the 2-channel Receiver box and plug-in the adapter.
When SETUP is displayed on the screen of the thermostat, follow the next steps:
Select language.
Set clock format, time
Touch
to begin
Touch
to start binding
and date.
setup.
with 2-channel Receiver box.
Next put the 2-channel Receiver box into binding mode by
pressing Zone 2 button for 3 sec.
- The first RF LED will flash amber
When binding successful:
the signal
Touch
and
- thermostat shows SUCCESSS
will be sent.
Zone 2 status LED shows green
.
touch
to proceed
6
T6R-2Z-EN0H 8603 NL01 R0718
Advertisement
