Factory Default Settings; Technical Specifications - NETGEAR EX6400 User Manual

Factory Default Settings

The following table includes the factory settings for the extender. You can use the Factory
Reset button or the log in to the extender and reset it to these settings. (See
Extender to Its Factory Settings
Table 2. Factory default settings
Feature
Setup Wizard
WiFi communication
WiFi network names (SSIDs)
Security
Transmission speed
Country/region
Operating mode
Data rate
DHCP
1. Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.

Technical Specifications

The following table includes the product specifications.
Table 3. Technical specifications
Feature
Network protocol and standards
compatibility
Power consumption
Physical specifications
AC1900 WiFi Mesh Extender Essentials Edition
on page 36.)
Setting
Enabled
Enabled
• 2.4 GHz network: NETGEAR_2GEXT
• 5 GHz network: NETGEAR_5GEXT
Disabled
1
Auto
Varies by region
802.11ac, 802.11n, 802.11g, 802.11b, 802.11a
Up to 300 Mbps for 2.4 GHz network and 1733 Mbps for 5 GHz network
Client enabled
Description
Data and routing protocols: TCP/IP, DHCP server and client, DNS
relay, NAT (many-to-one)
100–240V, 50/60 Hz, 0.5A maximum
• Dimensions: 145 x 200 x 100 mm (5.8 x 8 x 4 in.)
• Weight: 300 g (12 oz.)
Supplemental Information
46
Return the