For Your Safety - Panasonic HomeHawk KX-HNC710 Installation Manuals

Important Information
in the event of wireless
communication error or failure.

For your safety

To prevent severe injury and loss
of life/property, read this section
carefully before using the product
to ensure proper and safe
operation of your product.
Power connection
R Use only the 5.0 V, 1.0 A or
higher power source.
R Do not overload power outlets
and extension cords. This can
result in the risk of fire or
electric shock.
R Completely insert the AC
adaptor/power plug into the
power outlet or micro-USB
connector into the power supply
device's micro-USB jack.
Failure to do so may cause
electric shock and/or excessive
heat resulting in a fire.
R Regularly remove any dust, etc.
from the AC adaptor/power plug
by pulling it from the power
outlet, then wiping with a dry
cloth. Accumulated dust may
cause an insulation defect from
moisture, etc. resulting in a fire.
6
HNC710_(en_en)_1227_ver.010.pdf 6
WARNING
For assistance, please visit http://shop.panasonic.com/support
R Unplug the product from power
outlets if it emits smoke, an
abnormal smell, or makes an
unusual noise. These
conditions can cause fire or
electric shock. Confirm that
smoke has stopped emitting
and contact us at http://
shop.panasonic.com/support
R Unplug from power outlets and
never touch the inside of the
product if its casing has been
broken open. Danger of electric
shock exists.
R Never touch the plug with wet
hands. Danger of electric shock
exists.
R Do not connect non-specified
devices.
Installation
R Do not place or use this product
near automatically controlled
devices such as automatic
doors and fire alarms. Radio
waves emitted from this product
may cause such devices to
malfunction resulting in an
accident.
R Do not allow the power cord to
be excessively pulled, bent or
placed under heavy objects.
R Do not mount the bracket in a
location higher than 2.2 m (7
feet 3 inches), in an unstable
location, in a location subject to
2017/12/27 15:55:02