High-Voltage Power Supply; Tray Extention - Brother HL-600 Service Manual

3.21

High-voltage Power Supply

(1) Remove the screw securing the high voltage power supply PCB.
(2) Disconnect the two connectors from the PCB.
High-voltage harness P
3.22 Tray Extension
(1) Pull the manual paper tray down toward the front of the printer.
(2) Put the tray extension down toward the front of the printer, and press the bottom of its both
side legs inward to release it.

Tray extention

Manual paper tray
High-voltage power supply
Fig. 3.24
Fig. 3.25
III - 15
CHG harness
Multi-purpose paper tray