Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Cisco 200E Series
Summary of Contents for Cisco 200E Series
-
Page 1: Quick Start Guide
Quick Start Guide Cisco Small Business 200E Series Advanced Smart Switches... -
Page 2: Mounting The Cisco Switch
Welcome Thank you for choosing the Cisco 200E series Advanced Smart Switch, a Cisco Small Business network communications device. This device is designed to be operational right out of the box as a standard bridge. In the default configuration, it will forward packets between connecting devices after power up. -
Page 3: Connecting Network Devices
Ethernet ports. The LED of the port lights if the device connected is active. Refer to Features of the Cisco Small Business Smart Switch, page 8 details about the different ports and LEDs on each switch. -
Page 4: Configuring The Cisco Small Business Smart Switch
IP network using the web-based interface, or by the CLI through the console port. Using the console port requires advanced skills. The switch works with Cisco Small Business network tools and services including the Cisco FindIT Network Discovery Utility that enables you to automatically discovers all supported Cisco Small Business devices in the same local network segment as your PC. - Page 5 The Advanced Smart Switch Login Page displays. Enter the default login information: The default username is cisco, and the default password is cisco. If this is the first time that you have logged on with the default Change Password Page username and password, the opens.
- Page 6 Enter the default login information: The default username is cisco, and the default password is cisco. If this is the first time that you have logged on with the default username and password, you must change the password.
-
Page 7: Next Steps
Next Steps The following optional tasks can be accomplished by using the procedures in the Cisco Small Business Advanced Smart Switch Administration Guide. • If you are not using DHCP on your network, set the connection type on the advanced smart switch to Static and change the static IP address and subnet mask to match your network topology. -
Page 8: Front Panel Ports
Due to the standard spanning tree loop detection logic, adding new connections may take 30 to 60 seconds for the affected interfaces and/or LAN to become operational. Features of the Cisco Small Business Smart Switch This section describes the exterior of the advanced smart switches including ports, LEDs, and connections. -
Page 9: Front Panel Leds
• MiniGBIC ports are compatible with Cisco miniGBIC modules MGBSX1, MGBLH1, MGBLX1, MGBBX1, MFELX1, MFEFX1, and MFEBX1, as well as other brands of miniGBIC modules. -
Page 10: Back Panel
• To restore the advanced smart switch configuration to the factory default settings: 1. Disconnect the advanced smart switch from the network or disable all DHCP servers on your network. 2. With the power on, press-and-hold the Reset button for more than 10 seconds. 200E Series Advanced Smart Switches... -
Page 11: Where To Go From Here
Phone Support Contacts www.cisco.com/en/US/support/tsd_cisco_ small_business_support_center_contacts.html Cisco Small Business Firmware www.cisco.com/cisco/software/ Downloads navigator.html?a=a&i=rpm Select a link to download firmware for Cisco Small Business Products. Product Documentation Cisco Small Business Advanced www.cisco.com/go/200switches Smart Switches Click on the Resources Tab. Regulatory, Compliance, and www.cisco.com/en/US/docs/switches/lan/... - Page 12 Small Business Support US: 1-866-606-1866 Small Business Support Global Contact Numbers Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/...