User Manual
The tolerance test result is shown a Pass
•
icon.
4.2
SET-UP
1. Set the Druck DPI611 channels in the Calibrator function. (See
Section 2.2).
2. Connect the calibrator to the device under test.
3. Enter the Documenting function.
4. Tap the ANALYSIS button.
4.2.1
Define the Reference Channel
Tap the channel button that is to be used as the Reference
1.
channel for the analysis.
2. Set the channel type to Reference.
3. All other channel settings for that channel are cancelled. All
other active channels are set to Input.
Page 62 of 79
DASHBOARD >>
Figure 4-1 Select Reference Channel
DOCUMENTING
[EN] English – K0571 Issue 1
Druck DPI611
or
Fail