Cisco ASA 5506-X Easy Setup Manual page 3

2
Installing ASDM
To configure the ASA, use the Cisco Adaptive Security Device Manager (ASDM).
Follow these steps to download the Cisco ASDM from the ASA and install it to your
PC.
1
2
Caution
If the Cisco ASDM web page does not appear, make sure that:
The POWER LED and STATUS LED are solid green.
・
・ You connect a straight-through cable to an Ethernet port on the ASA.
Any pop-up blockers or proxy settings on your browser are disabled and that any
・
wireless client is disabled on your PC or laptop.
・ Your PC settings use DHCP. The ASA acts as a DHCP server. If your PC has a static IP ad-
dress, temporarily configure your PC settings to use DHCP.
1
Launch a Web browser PC
and enter the IP address
" h t t p s : / / 1 9 2 . 1 6 8 . 1 . 1 "
into the address bar, then
press Enter key.
Depending on your environ-
ment, the security certificate
page appears.
2
Click ［ Continue to this
website (not recommend-
ed) .
］
The Cisco ASDM web page ap-
pears.
3
Depending on your environ-
ment, the authentication dialog
3 box appears.
4
Leave the username and pass-
word fields empty.
4
5
The InstallShield Wizard for
Cisco ASDM Launcher appears.
5
Cisco ASA with FirePOWER Services Easy Setup Guide
2 Installing ASDM
Click [Install ASDM
Launcher].
Click [OK].
Click [Run].