Assembling And Adjustments; Assembly - Husqvarna WCV 180 Operator's Manual

Assembly

Blade - fixed
• Loosen the bolts holding the protective hood and then
lift off the hood.
• Dismantle the retaining ring.
• Slide the blade onto the shaft. Check the blade's
direction of rotation. The arrow on the blade should
align with the arrow on the inside of the protective
cover.
• Slide the hook nut onto the shaft. Hold down the
button for locking the blade shaft.
• Tighten then nut using the hook spanner.

ASSEMBLING AND ADJUSTMENTS

Blade - adjustable
• Mount the blade hub, the blade and the hook nut
together. Check the blade's direction of rotation. The
flat, broad side of the blade hub should be directed
inwards, facing the machine.
• Slide the blade with the hub onto the shaft. Check the
blade's direction of rotation. The arrow on the blade
should align with the arrow on the inside of the
protective cover.
• Slide the locking nut onto the shaft. Set the required
gauge. Hold down the button for locking the blade
shaft.
• Tighten then nut using the hook spanner.
• Check that you can pull the blades round by hand.
• Assemble the retaining ring.
• Assemble the protective cover.
–
English 9