Installation is Complete!
Installation of the DUB-E100 is complete. The LINK LED should be solid green,
indicating a good physical connection between the DUB-E100 and the network.
The TX/RX LED indicates when data is being transmitted or received. If both LEDs
are unlit, there may be a problem with the physical connection. Check the cables
between your DUB-E100, the computer, and the network. Verify that your network
switch, hub, or router is powered on.
LINK LED:
Lights up solid green when the
DUB-E100 has a good physical
connection to the network.
TX/RX LED:
F l a s h e s g r e e n w h e n d a t a i s
transmitted/received at 100Mbps.
When data is transmitted/received
at 10Mbps the LED flashes amber.
20