Quick View; Initialization(Reset All) - Samsung DIGIMAX 301 User Manual

Quick view

If you enable Quick View before capturing an image, you can view the image you just
captured on the LCD monitor for the duration set in the [Q.VIEW] setup.
Quick view is possible only with still images.
Setting Quick View
1. In any mode other than Voice Recording mode, press
the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [Q.VIEW] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [OFF]
- [1 ~ 3 SEC]
5. Press the menu button twice and the menu will disappear.

Initialization(RESET ALL)

All camera menu and function settings will be restored to their default values. However,
values for DATE/TIME, LANGUAGE, and VIDEO OUT will not be changed.
Initializing the Camera
1. In any mode other than Voice Recording mode, press
the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [RESET] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- If [NO] is selected : Settings will not be restored to their defaults.
- If [YES] is selected : All settings will be restored to their defaults.
5. Press the menu button twice and the menu will disappear.
64
: The quick view function can't be activated.
: The captured image is briefly displayed during the selected time.
SETUP
BEEP
1 SEC
VIDEO
Q.VIEW
BACK: SET:OK
SETUP
VIDEO
NO
Q.VIEW
YES
RESET
BACK:
SET:OK