How To Get Started - Honeywell UDC 3300 Product Manual

3.3

How To Get Started

Read the configuration
tips
Read configuration
procedure
Set up groups
Parameter explanations
or definitions
Configuration record
sheet
38
Read "Configuration Tips" shown on the next page. These tips will help
you to easily and quickly accomplish the tasks at which you will be
working when you configure your controller.
Read "Configuration Procedure". This procedure tells you how to
access the Set Up groups, and the Function parameters within each of
these groups that are shown in the Prompt Hierarchy in Figure 3-1.
The Set Up groups and Function parameters are listed in the order of
their appearance. The list includes the name of the prompt, the range of
setting selections available, the factory setting, and the section to
reference for further details, if necessary.
If you need a detailed explanation of any prompt listed, refer to Section 4
– Configuration Parameter Definitions.
Section 4 lists the Set Up and Function prompts, the selections or range
of settings that you can make for each, plus a detailed explanation or
definition of each parameter.
Located on the last page of this section is a "Configuration Record
Sheet". When you make your configuration selections, record them on
this sheet. Then you will have a record of how the controller was
configured.
UDC 3300 Process Controller Product Manual 4/00