Table of Contents
Advertisement
6.2.2
Proxy Settings
This function is intended to judge whether the proxy
server is required for the computer networking; if not
required, select "Don't Use the Proxy Server".
Setting method for using the proxy server:
1. Select "Use the Proxy Server";
2. Enter the address and port information;
3. If there have user name and password, you must to
enter the correct information, then using the proxy
server;
4. Click the "OK" button.
6.�
Activation
If the product is not activated, you can only view the
test demonstration rather than carrying out the diagno-
sis with KT400.
Operation Steps:
1. Check whether KT400 is normally connected with
internet;
2. KT400 will automatically detect the product serial
number, click "Activation" button, the software will
automatically detect the netword; If not ok, display
"Network connection overtime", please enter into
"Network connection" model to set;
3. If network is worked to proceed to the individual in-
formation filling interface; please enter your informa-
tion following the interface prompts; If information
incorrect, you must to re-enter;
4. If all information is accurate, click the "Next" button,
the interface will display "Successful product activa-
tion, software must to restart";
5. Please restart software, you can using it.
i
User name is combined by letters and numbers, the
length is 3-16 characters; the password length is
6-16 characters;
i
The user name is used for upgrade log-in, which
can't be repeated, and real-name registration is
recommended; the E-mail is used for the password
retrieve, and please fill your frequently-used E-mail;
upon submitting your individual information, please
remember your user name and password.
Bosch Automotive Diagnostics Equipment (Shenzhen) Limited
KT400 system settings | ��� | 15
6.4
Upgrade
Upgrade include software upgrade, VCI upgrade, sys-
tem upgrade and local upgrade.
This function is available only after the product activati-
on. If not, display "Not activation".
i
Before upgrade, please ensure the normal connec-
tion between the KT400 and internet;
i
Ensure the integrity of the upgrade process by not
forcing to terminate the program.
6.4.1
Software Upgrade
Software upgrade includes application software up-
grade and diagnostic database upgrade.
Operation Steps:
1. The software will automatically detect the version of
application software and diagnostic database;
2. If you didn't change the user name and password,
click the "New Version Detection" button to detect
the latest version; If you changed, you must to enter
user name and password at first;
3. If there have new version, the interface will display
"Download" button;
4. Click "Download" button, waiting for finished; You
can monitor download progress;
5. After successfully download, click "Install" button to
insatll upgrade package;
6. After restart software, you can using the latest soft-
ware.
i
When you log-in, user name and password is entered
3 times, if more, you must to wait 15 minutes.
6.4.2
��� upgrade
If software upgrade package include the latest VCI up-
grade package, when you open KT400, the system will
automatically remind to upgrade.
Operation steps of manually upgrade:
1. Click "Upgrade" button to upgrade, You can monitor
upgrade progress;
2. Wait for finished, if successfully upgrade, display
"Successfully upgrade".
��� | 15
| 15
en
Advertisement
Table of Contents
