Pc With Wi-Fi Adapter; Configuring Wi-Fi Adapter In Os Windows 7 - D-Link DAP-1610 User Manual

Ac1200 wi-fi range extender
Hide thumbs Also See for DAP-1610:
Table of Contents

Advertisement

DAP-1610 AC1200 Wi-Fi Range Extender
User Manual

PC with Wi-Fi Adapter

1. Plug the device into an electrical outlet or power strip.
2. Turn on your Wi-Fi adapter. As a rule, modern notebooks with built-in wireless NICs are
equipped with a button or switch that turns on/off the wireless adapter (refer to your PC
documents). If your PC is equipped with a pluggable wireless NIC, install the software
provided with your Wi-Fi adapter.
Now you should configure your Wi-Fi adapter.

Configuring Wi-Fi Adapter in OS Windows 7

1. Click the Start button and proceed to the Control Panel window.
2. Select the Network and Sharing Center section. (If the Control Panel has the category
view (the Category value is selected from the View by drop-down list in the top right
corner of the window), choose the View network status and tasks line under the
Network and Internet section.)
3. In the menu located on the left part of the window, select the Change adapter settings
line.
4. In the opened window, select the icon of the wireless network connection and make sure that
your Wi-Fi adapter is on.
Figure 8. The Control Panel window.
Page 19 of 91
Installation and Connection

Advertisement

Table of Contents
loading

Table of Contents