Adjusting Headlight Distribution - Honda JAZZ Owner's Manual

Adjusting Headlight Distribution

Driving the right-hand type vehicle in right-hand traffic, or the left-hand type vehicle
in left-hand traffic causes headlight glare to oncoming vehicles. You need to alter
the headlight beam distribution using masking tape.
Right-hand drive type vehicle
8 mm (0.3 in)
19°
20 mm
(0.8 in)
Centre point
5 mm (0.2 in)
19°
Centre point
1. Prepare for two rectangular pieces of masking tape, measuring 24 mm (0.9 in)
wide and 113 mm (4.4 in) long, and 28 mm (1.1 in) wide and 143 mm (5.6 in)
long.
u Use masking tape that can shut out light, such as seal type waterproof vinyl.
2. Affix the tape to the lens as shown.
u The label is inclined downward at 19°.
Left-hand drive type vehicle
5 mm (0.2 in)
12 mm
(0.5 in)
12 mm
(0.5 in)
Centre point
8 mm
(0.3 in)
12 mm
(0.5 in)
20 mm
12 mm
(0.8 in)
(0.5 in)
Centre point
uuWhen DrivinguAdjusting Headlight Distribution
1Adjusting Headlight Distribution
Be careful not to adhere the tape to an incorrect
location. If the headlight beam is distributed
incorrectly, it may not comply with your country's
legal requirements. Ask your dealer for details.
19°
19°
445