Indicator
Name
Lane Departure
Warning Indicator
*1 : Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
On/Blinking
Comes on for a few seconds when you
●
turn the ignition switch to ON
then goes off.
Comes on if there is a problem with the
●
lane departure warning system.
Comes on when the system shuts itself
●
off.
*
Explanation
Stays on constantly - Have your
●
*1
,
vehicle checked by a dealer.
(
w
Stays on - The temperature inside the
●
camera is too high.
Use the heating and cooling system
climate control system
the camera.
The system activates when the
temperature inside the camera cools
down.
2 Lane Departure Warning Camera
P. 433
Stays on - The area around the
●
camera is blocked by dirt, mud, etc.
Stop your vehicle in a safe place, and
wipe it off with a soft cloth.
Have your vehicle checked by a dealer
●
if the indicator and message come
back on after you cleaned the area
around the camera.
2 Lane Departure Warning Camera
P. 433
uuIndicatorsu
Message
*
/
*
to cool down
Continued
103