Inspecting And Changing Fuses - Honda 2018 Jazz Manual

uuFusesuInspecting and Changing Fuses

Inspecting and Changing Fuses

Fuse Box on the Battery
Fuse Puller
Combined Fuse Combined Fuse
Blown Fuse
*1 : Models with the keyless access system have an ENGINE START/STOP button instead of an ignition
switch.
* Not available on all models
524
1. Turn the ignition switch to LOCK
headlights and all accessories off.
2. Remove the fuse box cover.
3. Check the large fuses on the battery in the
engine compartment.
u
If the fuse is blown, have it replaced by a
Blown
dealer.
Fuse
4. Inspect the small fuses in the engine
compartment and the vehicle interior.
u
If there is a blown fuse, remove it with
the fuse puller
one.
5. Check the large fuse in the vehicle interior.
u
If the fuse is blown, use a phillips-head
screwdriver to remove the screw and
replace it with a new one.
( 0
*1 . Turn
* and replace it with a new
1Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Replace fuse with a spare fuse of the same specified
amperage.
Use the charts to locate the fuse in question and
confirm the specified amperage on the fuse label.
2 Fuse Locations P. 507
There is a fuse puller * on the back of the engine
compartment fuse box cover.