Honeywell BW Clip4 Operator's Manual page 3

Shop for Gas products online at:
rials. If BW Clip4's flammable sensor is suspected to be damaged
by aggressive substances, please perform Bump Test and Calibra-
tion per this manual.
CAUTION
• Activate the detector before the activation date on the package.
• This product is a gas detector, not a measurement device.
• Ensure that the sensor grill is free of dirt, debris, and is not ob-
structed.
• Clean the exterior with a soft, damp cloth.
• For optimal performance, periodically zero the sensor in a normal
atmosphere (20.9% v/v O
• Portable safety gas detectors are life safety devices. Accuracy of
ambient gas reading(s) is dependent upon factors such as accu-
racy of the calibration gas standard used for calibration and fre-
quency of calibration. Honeywell Analytics recommends perform-
ing a calibration at least once every 180 days (6 months).
• The combustible gas sensor is initially calibrated to 50% LEL
methane. Only methane gas should be used to calibrate or bump
test the combustible gas sensor.
• Only the combustible gas detection portion of this instrument has
been assessed for performance.
• High off-scale readings may indicate an explosive concentration.
• Any rapid up scaling reading followed by a declining or erratic
reading may indicate a gas concentration beyond the upper scale
limit, which can be hazardous.
• Products may contain materials that are regulated for transporta-
tion under domestic and international dangerous goods regula-
tions. Return product in compliance with appropriate dangerous
goods regulations. Contact freight carrier for further instructions.
• Recycling: this instrument contains a lithium battery. Do not mix
with the solid waste stream. Spent batteries should be disposed of
by a qualified recycler or hazardous materials handler.
CanarySense
www.
) that is free of hazardous gas.
2
.com
3
1.888.610.7664