Equipment Use; Battery Charge; Connection - Honeywell POL-200-TS User Manual

3. Equipment use

3.1 Battery charge

Use only the original charger provided with the device. Do
not charge the appliance at temperatures lower than 0°C or
higher than 40°C. Using a universal charger will automati-
cally invalidate the guarantee.
Before you use the device for the first time, you must charge the
battery completely.
Put the proper adapter on the feeder, according to the country of
use, then plug the battery charger into a socket and insert its end
into the seat on the right side of the device.
When the device is on, the charge indicator shows that charge is
in progress.

3.2 Connection

The spring-loaded connectors to which the loop cables must be connected are located on the
upper part of the equipment.
The first device in the loop must be connected to the right connectors, while the return cables
mus be connected to the left connectors.
There is also a connection point for the earthing cable on the device.
The positions of the cables on the terminal board are indicated in the upper part of the touch
screen panel, in the HOME screen.
The following is an example of connection.
POL-200-TS User Manual
Optional Wiring
+ - Shield
Loop In Return
9
To the first loop device
+ - Shield
Loop Out