Sample; Map - Honeywell POL-200-TS User Manual

3.8 Sample

3.9 Map

The ISO terminals must be properly wired and the devices must support Advanced Proto-
col to obtain the right mapping.
Devices like View FSL-751 or Pinnacle only answer in CLIP protocol, so do not include an
isolator to be activated from POL-200-TS.
POL-200-TS User Manual
The Sample option allows the user to select a
list of devices that will be monitored continu-
ously with detailed information in CLIP mode
for address below 99.
By pressing "Map" it is possible to visual-
ly check the loop wiring map. Follow the in-
structions below:
If the installer has correctly wired the isolators
using the +IN, +OUT terminals in the B501AP
or in the module terminals, POL-200-TS will
activate the isolator and a graph is displayed.
POL-200-TS provides a device map for any
of the protocols, CLIP or Advanced. Given the
characteristics of each protocol, the position
of each device may change according to the
information obtained.
Remember that in CLIP protocol and mul-
ti-module devices, each input or output oc-
cupies one address in the loop. For Advanced
protocol only the main address will be visible.
17