Removing And Mounting The Projector Covers - NEC NP-PH3501QL Installation Manual

1. Before Setting Up Your Projector

1-5. Removing and Mounting the Projector Covers

This section provides guideline information on how to remove and mount covers on the projector.
Name of the cover
Air inlet (Filter cover / Filter)
Lens cover
Side panel
Air outlet
Air outlet
Air outlet
Plate inlet
Air inlet (Filter cover / Filter)
NOTE:
• "Side panel" and "Lens cover" are equipped with key locks. Special keys (service key) are required to remove or mount them.
Refer to "Position of the key locks on the covers" (→ page 14) for details.
• Do not turn on the power when the lens cover and the side panel are removed.
• When removing the lens cover, return the lens shift to the center position before turning off the power.
13