Indicator Messages - NEC NP-PH3501QL Installation Manual

7-2. Indicator Messages

This section helps you resolve problems you may encounter while setting up or using the projector.
POWER Indicator
Indicator display
Off
Flashing Green (short flashes)
Green (twice per cycle)
Green (long flashes)
Orange (long flashes)
Lit Green
Orange
STATUS Indicator
Indicator display
Off
Flashing Green (short
flashes)
Green (long
flashes)
Orange
Red
Lit Green
Orange
Red
Projector status
Power is off.
Preparing to power up or cooling the main
unit
When the projector is in the standby state,
the firmware is ready to be updated
Firmware is ready to be updated
Off timer (enabled)
Program timer (off time enabled)
Program timer (on time enabled)
Power on
Standby mode
Projector status
No problem
Shutter is closed
Power on (The light mod-
ule is turned off.)
Button has been pressed
while projector is in key
lock mode
Projector's ID number
and remote control's ID
number do not match
Projector cooling
Error occurring
Power on
Standby mode
Error requiring service
support
–
–
–
The projector's keys are locked. The setting must be can-
celed to operate the projector.
Check the control IDs.
Wait a while.
Contact your distributor or service personnel. Let us know
the details displayed on the liquid crystal indicator panel
then.
–
–
Ask your distributor or service personnel for repair. Let us
know the details displayed on the liquid crystal indicator
panel then.
100
7. Appendix
Procedure
–
Wait a while.
–
–
–
–
–
Procedure