Mounting The Bar Speaker On A Wall - Sony HT-S200F Operating Instructions Manual

3
Adjust the volume of the system
by using the TV remote control.
When pressing the mute button on
the TV remote control, the sound is
muted temporarily.
Tip
When the TV is turned off, the system is
also turned off by interlocking with the TV
power.
About operations with the
remote control that is supplied
with the system
You can use the following buttons.
You can adjust the level of the bass tone
and sound quality in addition to turning
the system on/off and adjusting volume
that can be operated by the TV remote
control.
Note
If you select the USB input on the
remote control supplied with the
system, the TV sound is not output from
the system. To output the TV sound,
press INPUT on the remote control to
select the TV input.
16
US

STANDARD
AUTO SOUND
MUSIC
CINEMA
NIGHT
VOICE
 +/–

BASS
Mounting the Bar
Speaker on a Wall
You can mount the Bar Speaker on a
wall.
Notes
• Prepare screws (not supplied) that are
suitable for the wall material and
strength. As a plasterboard wall is
especially fragile, attach the screws
securely in the wall beam. Install the
speakers horizontally, hung by screws in
studs in a continuous flat section of the
wall.
• Have the installation done by a Sony
dealer or licensed contractor and pay
special attention to safety during the
installation.
• Sony shall not be held responsible for
accidents or damage caused by improper
installation, insufficient wall strength,
improper screw installation or natural
disaster, etc.