Advertisement
Installing the Cisco Input Module
Figure 4-8
Connect the wires from the input devices.
c.
Note
Step 5
See the
Cisco Physical Access Gateway User Guide
4-8
Input Connections: Cisco Physical Access Gateway and Reader Module
1K,, 1%
1K,, 1%
Each of the input connections can be configured as supervised or unsupervised. The tamper
(TM) and power fail (PF) inputs can be configured as additional unsupervised ports. A
supervised input supports four states: normal, alarm, open and short. An unsupervised input
indicates only normal or alarm.
Cisco Physical Access Manager User Guide
1K,, 1%
NC
1K,, 1%
NO
for information to configure the module ports.
Chapter 4
Connecting a Cisco Input Module
OL-20932-01
Advertisement
