Cisco TelePresence SX10 Installation Manual page 3

1.
Before mounting the SX10
Mount the screen
For the best conferencing experience,
mount the screen at 130-145 cm
(4 ft 3 in.- 4 ft 9 in.) height.
For pre-installed and larger screens,
placing the SX10 under the screen
may work better. Connect the cables,
and set the device on a table or a shelf
under the screen to check the image
before wall mounting the SX10.
For more on room guidelines and recommendations for other scenarios visit:
collaborationhelp.cisco.com and www.cisco.com/go/projectworkplace
Measure screen depth to determine the SX10 installation height
The thicker the screen, the further up from the screen you should install the SX10.
This is to ensure that the screen doesn't block the camera view.
Display depth D
<100 mm
<3.94 in.
100 - 130 mm
3.94 - 5.12 in.
130 - 150 mm
5.12 - 5.91 in.
150 - 170 mm
5.91 - 6.69 in.
170 - 190 mm
6.69 - 7.48 in.
Wall mount height H
110 mm
4.33 in.
130 mm
5.12 in.
150 mm
5.91 in.
170 mm
6.69 in.
185 mm
7.48 in.
H
D
130 - 145 cm
4 ft 3 in.- 4 ft 9 in.