Specifications; Attachments/Accessories; Operation; Checking The Engine-Oil Level - Toro Reelmaster 5410-D Operator's Manual

Specifications

Note:
Specifications and design are subject to
change without notice.
Specification
Transport Width
Width of cut
Length
Height
Weight
(with fluids and 8 blade cutting units installed)
Engine
Fuel tank capacity
Transport speed
Mowing speed

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
ReelMaster® 5410-D
228 cm (90 inches)
254 cm (100 inches)
282 cm (111 inches)
160 cm (63 inches)
1,335 kg (2,943 lb)
Yanmar
36 hp
53 liters (14 US gallons)
0–16 kph (0–10 mph)
0–13 kph (0–8 mph)

Operation

Note:
Determine the left and right sides of the
machine from the normal operating position.
CAUTION
If you leave the key in the ignition switch,
someone could accidently start the engine
and seriously injure you or other bystanders.
Lower the cutting units to the ground, set the
parking brake and remove the key from the
ignition switch before servicing or making
adjustments to the machine.
Checking the Engine-Oil
Level
Before you start the engine and use the machine,
check the oil level in the engine crankcase; refer to
Checking the Engine-Oil Level (page
25
ReelMaster® 5510-D
233 cm (92 inches)
254 cm (100 inches)
282 cm (111 inches)
160 cm (63 inches)
1,420 kg (3,131 lb)
Yanmar
36 hp
53 liters (14 US gallons)
0–16 kph (0–10 mph)
0–13 kph (0–8 mph)
47).