Setup - Toro Reelmaster 5410-D Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
Media and Additional Parts
Description
Operator's Manual
Engine Operator's Manual
Parts Catalog
Operator Training Material
Cutting Performance Paper
Shim
Note:
Determine the left and right sides of the
machine from the normal operating position.
Description
No parts required
No parts required
No parts required
Front hose guide-R.H.
Front hose guide-L.H.
No parts required
Cutting unit kickstand
Qty.
–
–
–
1
1
–
1
Qty.
1 Read the Operator's Manual before operating the machine.
1 Use to reference engine information
1 Use to reference part numbers
1 Review before operating the machine
1 Used for adjusting the cutting unit bedknife to reel
1 Used for adjusting the cutting unit bedknife to reel
12
Use
Adjust the tire pressure.
Adjust the step height.
Adjust the control arm position.
Install the cutting units
Adjust the turf compensation spring.
Install the Cutting Unit Kickstand.
Use