3.INSTALLING PRINTER DRIVERS FOR WINDOWS
Web Service Print
This equipment supports the WSD (Web Services on Devices) protocol installed in Windows Vista or later / Windows
Server 2008 or later. The following describes how to install a printer driver using the WSD protocol.
P.73 "Windows 7 or later / Windows Server 2012 or later"
P.76 "Windows Vista / Windows Server 2008"
Windows 7 or later / Windows Server 2012 or later
Follow the steps below to install a printer driver on Windows 7 or later / Windows Server 2012 or later.
To perform installation, you must log onto Windows with the "Administrator" account.
To begin the installation, you must first install the printer driver to your computer.
For instructions on how to install it to your computer, see the following page:
P.36 "Installing the Printer Drivers"
Open the [Network] screen.
1
Click [Start] > [File Explorer] > [Network].
For Windows 8.1 / Windows Server 2012, click the start charm and click [All apps] > [Computer] > [Network].
For Windows 7, click [Start] > [Computer] > [Network].
Go to step 4 if the Network discovery is enabled.
Go to the next step if the Network discovery is disabled.
2
Click [Network discovery is turned off. Network computers and devices are not visible. Click to
change]. Then select [Turn on network discovery and file sharing].
Other Installations 73