Table of Contents
Advertisement
User Manual
Aolynk VDR824 ADSL2+ VoIP Broadband Router/
Aolynk VDR824g ADSL2+ VoIP Wireless Broadband Router
Note:
To chang
information.
If you receive an error message or the configuration page cannot be displayed, refer
to section 6.1 "VDR824/824g Troubleshooting" for detailed instructions.
3.3 Description of the Factory Default Settings
The VDR824/824g is configured with factory default settings for SOHO users.
The table below lists some of the most important default settings and the subsequent
chapters will cover all the features in detail. If you are familiar with network
configuration, review these settings to verify that they meet the requirements of your
network and follow the instructions to change them if necessary. If not, use the
VDR824/824g with the default settings.
Table 3-1 Description of the factory default settings
Default
name/password
IP address of the
LAN port
DHCP
(dynamic
configuration
protocol)
NAT
address translation)
e the logi
n password,
Item
Default settings
Administrator:
admin/admin
user
Common
user/user
Assigned static IP
address:
192.168.1.1
Subnet mask:
255.255.255.0
DHCP
enabled with the
following
host
addresses:
192.168.1.2
192.168.1.51
(network
NAT enabled
refer to
section 4.6.1 "Password" for detailed
You can log into the Web configuration
page as an administrator or a common
user. Different operation rights are
available for different login users.
user:
Refer to 4.6.1 "Password" for detailed
information.
This is the IP address of the
VDR824/824g
connects the VDR824/824g to your
Ethernet network. Generally, there is
no need to change this address.
The VDR824/824g provides a pool of
server
private IP addresses for dynamic
assignment to PCs in the LAN. To use
pool
of
this service, you must configure your
PC
to
dynamically. Refer to section 7.2.1
to
"Specifying to Obtain an IP Address
Automatically".
Your PC's private IP address is
translated to the public IP address
whenever it accesses the Internet.
Refer to section 5.2.1
configuration" for detailed information.
12
3 Getting Started
Description
LAN
port
obtain
an
IP
address
IV. "NAT
which
Advertisement
Table of Contents
