Device Connection - Huawei Aolynk VDR824 User Manual

User Manual
Aolynk VDR824 ADSL2+ VoIP Broadband Router/
Aolynk VDR824g ADSL2+ VoIP Wireless Broadband Router
Keep the cabinet or desk stable enough to hold the VDR824/824g. Fix the
VDR824/824g and po
Reserve more than 10 cm (4 in.) of clearance around the VDR824/824g chassis
for heat dissipation.
Keep the operation environment clean. Dust buildup on the chassis may result in
static absorption, reducing the life span and causing commu
Use an earthing system or lightning protection grounding different from that for the
power supply equipment and keep them as far as possible.
Keep the VDR824/824g far away from high-power radio launchers, radar
launchers, and equipment with high-frequency and high-current.
Wire the port ca
port from damages that may be caused by overvoltage and overcurrent from
lightning strike.

2.3 Device Connection

PC PC
Figure 2-1 Connect the VDR
I. Connect to an ADSL line
To c onnect the VDR824/824g to an ADSL line, two options are available:
Connect one end of the tele
telephone port) on the VDR824/824g rear panel, and the other end to the
telephone jack on the wall.
wer adapter well on the wall when wall-mounting it.
ble indoors. Outdoor cabling is prohibited, to prevent the signal
Phone Phone
LAN LAN
USB USB
VDR824g VDR824g
Notebook Notebook
824/824g
phone cable to the ADSL port (similar to a common
7
Telephone jack Telephone jack
ADSL ADSL
Line Line
Splitter Splitter
ADSL ADSL Phone Phone
Telephone Telephone
2 Installation
nication failure.
Telephone Telephone