RIDGID R844 Operator's Manual page 11

18 volt reciprocating saw variable speed
Table of Contents

Advertisement

OPERATION
OPERATION
LED FUNCTION OF CHARGER
See Figure 4.
LED
INDICATOR
Power
Evaluate
Evaluate
Evaluate
Evaluate
Charging
Full
POWER
INDICATOR
EVALUATE
INDICATOR
CHARGING
INDICATOR
BATTERY
PACK
Without battery pack
Hot battery pack
Cold battery pack
Deeply discharged
Thermistor shorted
or open
Fast charging
Slow charging
FULL
INDICATOR
RED
GREEN
LED
LED
ON
OFF
Flashing
OFF
Flashing
OFF
Flashing
OFF
Flashing
OFF
ON
Flashing
OFF
ON
NOTE: The 9.6 volt, 12 volt and 14.4
volt battery packs will not slide all the
way down onto the charger port. Insert
9.6 volt, 12 volt, and 14.4 volt battery
packs until they click into place and
are aligned with the line on the charger,
shown at left.
Allow up to 5 seconds for the "charge"
light to come on after the battery pack
is inserted.
11
ACTION
Ready to charge battery pack
When battery pack reaches cooled
temperature, charger begins fast
charge mode
When battery pack reaches
warmed temperature, charger
begins fast charge mode
Charger pre-charges battery until
normal voltage is reached, then
begins fast charge mode
If red LED continues flashing for
more than 90 minutes, and green
LED remains off, this may
indicate a damaged battery
Fast charges in 30 minutes
Fast charging is complete.
Charger maintains charge mode.
Fig. 4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents