Cisco 2000 User Manual page 115

N SCX W I
IAGARA EB NTERFACE
The Cisco Digital Media Encoder 2000 features integrated de-interlacing and inverse telecine filters
that automatically apply when needed. This allows the Cisco Digital Media Encoder 2000 to perform
at maximum efficiency. ViewCast recommends you do not enable the Real Encoder de-interlace and
inverse telecine filters since applying filters multiple times can produce undesirable results and
consume additional system resources.
Enable SureStream: SureStream allows you to encode the broadcast stream for multiple audiences.
However, each primary stream or substream you choose increases the processor load during
encoding and adds to the outgoing bandwidth requirements. For example, with SureStream enabled,
you can choose the 56k Dial-up audience and the 128k Dual ISDN audience. With SureStream
enabled, the encoding might require twice as much processing power.
Regardless of whether or not you enable SureStream, you must choose at least one Audience
Selection for your stream.
You can also choose to output to a file while streaming or output only to a file. In the File Name
field, type in a unique name for the file.
NOTE: If you use the same name as a current file, the current file will be overwritten.
After you have input your settings, click the Submit button at the bottom of the page to save your
changes.
Warning: If you click away to another Web page without first clicking Submit, your changes will be
lost.
Cisco Digital Media Encoder 2000 User Guide 103