Setting Up A Printer; Power Protection Devices; Printer Cable; Connecting A Usb Printer - Dell XPS M2010 Owner's Manual

Setting Up a Printer
NOTICE: Complete the operating system setup before you connect a printer to the computer.
See the documentation that came with the printer for setup information, including how to:
Obtain and install updated drivers.
l
Connect the printer to the computer.
l
Load paper and install the toner or ink cartridge.
l
For technical assistance, refer to the printer owner's manual or contact the printer manufacturer.

Printer Cable

Your printer connects to your computer with a USB cable. Your printer may not come with a printer cable, so if you purchase a cable separately, ensure that it
is compatible with your printer and computer. If you purchased a printer cable at the same time you purchased your computer, the cable may arrive in the box
in which your computer was shipped.

Connecting a USB Printer

NOTE: You can connect USB devices while the computer is turned on.
1. Complete the operating system setup if you have not already done so.
2. Attach the USB printer cable to the USB connectors on the computer and the printer. The USB connectors fit only one way.
1 USB connector on computer
3. Turn on the printer and then turn on the computer. If the Add New Hardware Wizard window appears, click Cancel.
4. Install the printer driver if necessary. See the documentation that came with your printer.
Power Protection Devices
Several devices are available to protect against power fluctuations and failures:
Surge protectors
l
Line conditioners
l
Uninterruptible power supplies (UPS)
l

Surge Protectors

Surge protectors and power strips equipped with surge protection help prevent damage to your computer from voltage spikes that can occur during electrical
2 USB printer cable 3 connector on printer