Mechanical Instructions - Philips 160EL1SB/00 Service Manual

36 Meridian 1

10. Mechanical Instructions

Tools: Cross-Screwdriver; Putty knife; hexagonal Screw-driver
Front and Back view
Front Back
Step 1: Remove the STAND-BASE ASS'Y
Remove the 3 screws as marked in red.
Note: Place the monitor face down on a smooth, clean and soft surface, be careful to avoid scratch and injury during
the process of uninstall.
Step 2: Remove the REAR COVER.
Rip the cover by the bottom clip with putty knife, and then remove the rear cover and bezel slightly.