Table of Contents
Advertisement
Startup
11. Add or remove channels from the TV/VCR's memory
12. Set the Time and Date (Clock)
13. Select a channel and adjust the volume
You may want to add or remove channels if some of them are not
active, have weak signals, or you do not want them in your channel
memory. A channel that has been removed can still be selected by
pressing the remote control's number buttons.
A. Press MENU on the remote to display the TV/VCR MAIN MENU.
B. Press 5 to display the SETUP menu.
C. Press 2 to display the ADD/REMOVE CHANNELS screen.
D. Follow the directions on the screen to add or remove a channel.
E. Add or remove more channels by entering the channel number or
pressing CHAN up or down.
To set the clock:
A. Press MENU on the remote to display the TV/VCR MAIN MENU.
B. Press 2 to display the TIME menu.
C. Press 1 to display the SET TIME and DATE screen.
D. Use the number buttons on the remote to enter the time.
• Press 0 before 1; 0 is added automatically before all other
numbers. Press 1 for AM or 2 for PM. Example: For a time of
1:07 PM, press 0, then 1, then 0, then 7, then 2.
E. Use the number buttons on the remote to enter the date.
• The day of the week will automatically appear after you enter
the year.
• Press CLEAR on the remote at any time to change incorrect
entries.
F. Press MENU on the remote to start the clock.
G. To exit and return to TV viewing, follow the on-screen instructions.
H. To display the time and date, press DISPLAY on the remote.
A. Press CHANNEL up or down or press the number buttons on the
remote to select a channel.
Example: For channel 2, press 0 then 2. The channel number
is displayed on the screen.
For cable channels over 99, press and hold 1 until 1– – appears.
Then enter the next two numbers. Example: For channel 102, press
and hold 1. When 1 - - appears, press 0, then press 2.
B. Press VOL left or right to adjust the volume. The volume display
appears on the screen.
Setting Up the TV/VCR
5
Advertisement
Table of Contents
