Table of Contents
Advertisement
Using the Playback Features
Auto Play Feature
This feature enables the TV/VCR to automatically start
playing a tape when it is inserted. (The safety tab on the
tape must be removed.)
1. Press MENU to display the TV/VCR MAIN MENU.
2. Press 5 to display the SETUP menu.
3. Press 4 to change the Auto Play setting.
Auto Repeat Feature
This feature tells the TV/VCR to play a tape (or part of
a tape) continuously. The TV/VCR will automatically
rewind the tape, or a selected portion of the tape, and
play it repeatedly.
1. Using REW, FF, or PLAY, go to the place on the tape
2. Using FF or PLAY, go to the place on the tape that
3. Press MENU to display the TV/VCR MAIN MENU.
4. Press 5 to display the SETUP menu.
5. Press 3 to display the AUTO REPEAT menu.
6. Using the number buttons, enter the amount of time
7. To cancel Auto Repeat, first display the AUTO
The Auto Play feature is set to ON at the factory.
• Select ON if you want a tape with its safety tab
removed to start playing automatically.
• Select OFF if you do not want a tape with its
safety tab removed to start playing automatically.
that you want to be the beginning of the section
that automatically repeats. Reset the time counter to
0:00:00 by pressing DISPLAY, then CLEAR.
you want to be the end of the section that plays
continuously. Remember the numbers on the time
counter. (2:55 is the end time for AUTO REPEAT in
the example to the right.)
you want the tape to repeat (the number from Step 2).
In the example at right, the section that the TV/VCR
will automatically repeat is 2:55 – two hours, 55
minutes long.
REPEAT menu by repeating steps 3-5 above. Then,
press CLEAR.
Playing a Tape
19
Advertisement
Table of Contents
