Adjusting The Side Clutch Cable - Honda HP500H Owner's Manual

327766300.book 44 ページ ２０１２年５月１５日 火曜日 午前１１時１７分

Adjusting the side clutch cable

Steering control will be impaired unless both side clutch cables are
adjusted properly.
1.With the engine off, rock the power carrier forward and backward to
find the position at which each lever can be pulled closest to the 
handle grip.
2.With each steering clutch lever fully gripped, check whether the
clearance between the projection on the lever and the handle grip is:
30.0–35.0 mm (1.18–1.38 in)
3.To adjust, loosen the lock nut with the lever gripped and turn the
adjust nut to get the prescribed clearance.
4.After the adjustment, tighten the lock nut.
30.0–35.0 mm
(1.18–1.38 in)
STEERING CLUTCH
LEVER
44
HANDLE GRIP
LOCK NUT
ADJUST BOLT