Adjusting The Brake Cable - Honda HP500H Owner's Manual

327766300.book 42 ページ ２０１２年５月１５日 火曜日 午前１１時１７分

Adjusting the brake cable

Braking effectiveness will be impaired if the brake cable is not adjusted
properly.
Adjustment
1.With the drive clutch lever set in the STOP position (brake is applied),
measure the brake spring collar to spring holder distance:
Specified distance: 14.0–16.0 mm (0.55–0.63 in)
2.If adjustment is necessary, loosen the lock nuts and move the brake
cable until the correct distance is obtained.
3.After the adjustment, tighten the lock nuts securely.
DRIVE CLUTCH LEVERS
STOP
BRAKE SPRING
COLLAR
42
STOP
14.0–16.0 mm
(0.55–0.63 in)
LOCK NUT (2)
BRAKE WIRE
STOP
SPRING HOLDER