Displaying Information About A Bvi - Cisco NCS 5500 Series Configuration Manual

Displaying Information About a BVI

Example:
RP/0/RP0/CPU0:router(config-l2vpn-bg)# bridge-domain 1
Creates a bridge domain and enters L2VPN bridge group bridge domain configuration mode.
Step 5 routed interface bvi identifier
Example:
RP/0/RP0/CPU0:router(config-l2vpn-bg-bd)# routed interface bvi 1
Associates the specified BVI as the routed interface for the interfaces assigned to the bridge domain.
Step 6 end or commit
Example:
RP/0/RP0/CPU0:router(config-l2vpn-bg-bd)# end
or
RP/0/RP0/CPU0:router(config-l2vpn-bg-bd)# commit
Saves configuration changes.
• When you issue the end command, the system prompts you to commit changes:
Uncommitted changes found, commit them before exiting(yes/no/cancel)?
[cancel]:
• Entering yes saves configuration changes to the running configuration file, exits the configuration session, and
returns the router to EXEC mode.
• Entering no exits the configuration session and returns the router to EXEC mode without committing the configuration
changes.
• Entering cancel leaves the router in the current configuration session without exiting or committing the configuration
changes.
• Use the commit command to save the configuration changes to the running configuration file and remain within
the configuration session.
Displaying Information About a BVI
To display information about BVI status and packet counters, use the following commands:
show interfaces bvi identifier [accounting | brief |
description | detail ]
show adjacency bvi identifier [detail | remote]
Interface and Hardware Component Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release
6.1.x
86
Integrated Routing and Bridging
Displays interface status, line protocol state, and
packet counters for the specified BVI.
Displays packet and byte transmit counters per
adjacency to the specified BVI.