Adjustment; Beam-Axis Alignment - Panasonic SF4B-F31G(V2) Instruction Manual

2-6 Adjustment

2-6-1 Beam-axis Alignment

1. Turn ON the power supply unit of this device.
2. Check that the digital error indicator (red) and the fault indicator (yellow) of the emitter and
receiver are OFF respectively.
If the digital error indicator (red) or the fault indicator (yellow) lights up or blinks, refer to
"Chapter 5 Troubleshooting," and report the symptoms to the maintenance in charge.
3. Loosen the hexagon-socket head bolt for beam axis alignment of the mounting bracket, and
adjust the emitter / receiver so that the beam-axis alignment indicators in the display of the
emitter and receiver light up.
The emitter and the receiver can be fine-adjusted by ±15 degrees.
© Panasonic Industrial Devices SUNX Co., Ltd. 2017
Hexagon-socket head bolt
for beam-axis alignment
15° 15°
53