Canon iPF780 Series Service Manual page 235

Chapter 7
5) EXCHANGE: Counters related to parts replacement
MTC EXC.
HEAD EXC.
BOARD EXC.(M/B)
CR-1 EXC.
CR-2 EXC.
CR-3 EXC.
CR-4 EXC.
CR-5 EXC.
SP-1 EXC.
PG-1 EXC.
HMa-1 EXC.
MT-1 EXC.
PL-1 EXC.
Mi-1 EXC.
CT-1 EXC.
WF-1 EXC.
WF-2 EXC.
6) DETAIL-CNT: Other counters
MOVE PRINTER
N-INKCHK(XX)
MEDIACONFIG-CNT
7) INK-USE1: Counters related to ink consumption
INK-USE1(XX)
INK-USE1(TTL)
LINK-USE1(XX)
LINK-USE1(TTL)
SINK-USE1(XX)
SINK-USE1(TTL)
N-INK-USE1(XX)
N-INK-USE1(TTL)
8) INK-USE2: Counters related to ink consumption
INK-USE2(XX)
INK-USE2(TTL)
N-INK-USE2(XX)
N-INK-USE2(TTL)
7-22
Display
Maintenance cartridge replacement count
Printhead replacement count
Main controller PCB replacement count
CR-1(carriage unit bushing) replacement count
(Count of executing [INITIALIZE] > [PARTS COUNTER] > [PARTS CR-1])
CR-2(fexible cable unit) replacement count
(Count of executing [INITIALIZE] > [PARTS COUNTER] > [PARTS CR-2])
CR-3(linear encoder sensor/linear scale/shaft cleaner) replacement count
(Count of executing [INITIALIZE] > [PARTS COUNTER] > [PARTS CR-3])
CR-4(carriage height changing cam) replacement count
(Count of executing [INITIALIZE] > [PARTS COUNTER] > [PARTS CR-4])
CR-5(multi sensor) replacement count
(Count of executing [INITIALIZE] > [PARTS COUNTER] > [PARTS CR-5])
SP-1(ink tube unit) replacement count
(Count of executing [INITIALIZE] > [PARTS COUNTER] > [PARTS SP-1])
PG-1(purge unit) replacement count
(Count of executing [INITIALIZE] > [PARTS COUNTER] > [PARTS PG-1])
HMa-1(head management sensor) replacement count
(Count of executing [INITIALIZE] > [PARTS COUNTER] > [PARTS HMa-1])
MT-1(carriage motor) replacement count
(Count of executing [INITIALIZE] > [PARTS COUNTER] > [PARTS MT-1])
PL-1(feed motor) replacement count
(Count of executing [INITIALIZE] > [PARTS COUNTER] > [PARTS PL-1])
Mi-1(mist fan/mist exhaust duct) replacement count
(Count of executing [INITIALIZE] > [PARTS COUNTER] > [PARTS Mi-1])
CT-1(cutter) replacement count
(Count of executing [INITIALIZE] > [PARTS COUNTER] > [PARTS CT-1])
WF-1(ink absorber under the maintenance cartridge unit) replacement count
(Count of executing [INITIALIZE] > [PARTS COUNTER] > [PARTS WF-1])
WF-2(platen exhaust duct) replacement count
(Count of executing [INITIALIZE] > [PARTS COUNTER] > [PARTS WF-2])
Display
A(B,C,D)
Display
XX: Ink color
Cumulative consumption amount of generic ink
Total amount of cumulative consumption of generic ink
XX: Ink color
Cumulative consumption amount of generic large ink
Total amount of cumulative consumption of generic large ink
XX: Ink color
Cumulative consumption amount of generic small ink
Total amount of cumulative consumption of generic small ink
XX: Ink color
Cumulative consumption amount of refilled ink
Total amount of cumulative consumption of refilled ink
Display
XX: Ink color
Consumption amount of generic ink of the currently installed ink tank.
Total consumption amount of generic ink of the currently installed ink tanks
XX: Ink color
Consumption amount of refilled ink of the currently installed ink tank
Total consumption amount of refilled ink of the currently installed ink tanks
Description
Description
A: Number of times "Prep.MovePrinter" on Main menu is
executed.
B: Number of times "Limited" (Level1)
C: Number of times "Standard" (Level2)
D: Level of "Prep.MovePrinter" that executed at previous time
XX: Ink color
Count of turning off the ink remaining level detection for each
color
Count of media registered by media editor
Description
Description
Unit
Times
Times
Times
Times
Times
Times
Times
Times
Times
Times
Times
Times
Times
Times
Times
Times
Times
Unit
Times
Times
Times
Unit
ml
ml
ml
ml
ml
ml
ml
ml
Unit
ml
ml
ml
ml